Skip to main content

Search...

Popular searches

How to Use a Hardware Wallet with Multiple Chains

Hold Bitcoin, Ethereum, Solana and other networks on one hardware wallet: how one recovery phrase covers every chain, how to add a new network, the shared EVM address, and moving assets between chains.

Reading Time: 9 min
Published: Nov 18, 2026
Frost
Frost

Introduction

One hardware wallet and one recovery phrase can hold coins on many blockchains at once. Each network gets its own account derived from the same phrase, and the device signs for all of them. This guide explains how that works, how to add a new network step by step, why Ethereum-compatible networks share one address, and what to check before moving assets from one chain to another.
Open rating formula41 wallets analyzedUpdated Nov 2026No sponsored rankings

TL;DR

  • What you'll do: manage coins on several blockchains from one hardware wallet and one recovery phrase.
  • How it works: every network gets its own account, derived from the same phrase along a standard path. Back up the phrase once and it restores all of them.
  • Adding a network: check that your model supports it, enable it in the manufacturer's app (on a Ledger, install its app on the device), add an account and check the receive address on the device screen.
  • Ethereum, Arbitrum, Base, Polygon, BNB Smart Chain and other EVM networks share one address. The network you send on still matters.
  • Watch out for: sending on a network the recipient does not support, and arriving on a new chain without its gas coin.

One device, one recovery phrase, many chains

A hardware wallet does not keep a separate key for every coin you buy. It keeps one secret, the recovery phrase, and derives a key for each network from it on demand. Each blockchain has its own branch in that derivation, set by a standard such as BIP44, so the same phrase always produces the same Bitcoin address, the same Ethereum address and the same Solana address, on any device that follows the standard. The route from phrase to address is called the derivation path.

Two practical consequences follow. First, you back up once: the phrase you wrote down when you set up the device restores every account on every network, including networks you add later. Second, adding a network never touches the others. Enabling Solana does not change your Bitcoin addresses, and removing an app from the device does not remove funds, because the funds are recorded on the blockchain, not stored on the device.

Network familyAddressGood to know
BitcoinStarts with bc1, 3 or 1, depending on the address typeEach address type is a separate account in the app. Funds on another type are not lost; add that account to see them.
Ethereum and other EVM networksOne 0x address for all of themThe same address on Ethereum, Arbitrum, Base, Polygon, BNB Smart Chain and so on. Balances are kept per network.
SolanaBase58 address, no prefixIts own account; tokens on Solana live at the same address.
Other networks (Cardano, Polkadot, XRP, Cosmos chains…)Each has its own formatSome are managed in the manufacturer's app, others only through a third-party wallet that supports your device.

Ethereum-compatible networks: one address, many balances

Networks built on the Ethereum Virtual Machine (EVM) use the same address format and the same key. Your Ethereum address on the device is therefore also your address on Arbitrum, Optimism, Base, Polygon, BNB Smart Chain, Avalanche C-Chain and other EVM networks. What differs is the balance: USDC sent to you on Arbitrum sits on Arbitrum, and an app set to Ethereum will not show it until you switch it to Arbitrum or add that network.

The shared address is convenient and is also the most common source of mistakes:

  • Choose the network, not only the address. When you withdraw from an exchange or send from another wallet, the network you pick decides where the funds land. The recipient, whether a person, an exchange deposit or a dapp, must support that network.
  • Funds sent on the "wrong" EVM network are usually still yours if the address belongs to your hardware wallet: add that network in your wallet app and they appear. Funds sent to an exchange deposit address on a network the exchange does not support may need the exchange's support team, or be lost.
  • Each network pays fees in its own coin. ETH on Arbitrum and Base, POL on Polygon, BNB on BNB Smart Chain. Without it you cannot move the tokens you hold there.

Moving assets between chains

A hardware wallet signs transactions on each chain; it does not move coins from one chain to another by itself. There are two ways to do that:

  • Through an exchange. Deposit on one network and withdraw on another. Simple and familiar, but the coins pass through an account the exchange controls, and the exchange decides which networks it supports for each coin.
  • Through a bridge or a cross-chain swap. A dapp locks or swaps the asset on the source chain and releases it on the destination. You sign on the device for the source chain, and the funds arrive at your address on the destination. Our guide to hardware wallets and cross-chain bridges walks through it; bridges carry smart-contract risk of their own, which no device removes.

Either way, the device and the app you use must support both chains, and you need some of the destination chain's gas coin for the first transaction there. A token that arrives as a wrapped or bridged version is not always the same asset as the native one, so check which contract you received before you trade it.

To add a network, connect the device to the app or wallet that supports it. Never type your recovery phrase into a wallet app, a website or a "network migration" tool: a phrase entered on a computer or phone is no longer protected by the hardware wallet.

Keeping track of a multi-chain portfolio

The manufacturer's app shows balances only for the networks it supports itself. Networks you manage through a third-party wallet, such as a network's own wallet or a browser wallet for EVM dapps, show up only there. Keep a short note, stored apart from the recovery phrase, of which app manages which network and which account; it saves a long search when a balance seems to be missing, and it helps anyone who may one day need to recover your assets.

If you want one view of everything, portfolio trackers can follow public addresses in read-only mode. They never need the recovery phrase or the device, and anything that asks for either is not a tracker.

Common problems

  • Tokens do not show up. The app is set to another network, the token is not listed by default (add it by its contract address), or the funds are on an account you have not added yet.
  • A balance is missing after restoring the phrase on another wallet. The other wallet uses a different derivation path or address type. Add the matching account or change the path; the funds are still on the blockchain.
  • The device rejects a transaction. The network's app is outdated or not open on the device, or the transaction needs blind signing, which is off by default on many devices.
  • The transaction fails for lack of gas. The account holds tokens on that network but none of its fee coin.
  • The app has no option for the network. The manufacturer does not support it in its own app. Check the model's review for supported third-party wallets.

Choosing a hardware wallet? Start with: Best for Advanced · Trezor Safe 5 vs BitBox02

WalletHardware Wallet

BlockchainMnemonic Phrase

Read full definition: Mnemonic Phrase
BlockchainStablecoin

BlockchainInteroperability

Read full definition: Interoperability
DefiSwap

BlockchainDerivation Path

Read full definition: Derivation Path

Key Terms

Frequently Asked Questions

Common questions about hardware wallets and crypto security

Can one hardware wallet hold Bitcoin, Ethereum and Solana at the same time?

Yes, if the model supports all three. One recovery phrase derives a separate account for each network, and the device signs for all of them. Some networks are managed in the manufacturer's app and others through a third-party wallet that supports the device.

Do I need a separate recovery phrase for each blockchain?

No. One recovery phrase restores the accounts on every network the device supports, including networks you add later. Back it up once, offline, and keep it away from the device.

Why is my address the same on Ethereum, Arbitrum and Base?

They are EVM networks, which use the same address format and the same key. The balances are separate: a token sent to you on Arbitrum is only visible when your wallet app is set to Arbitrum.

Which hardware wallets support the most blockchains?

Network coverage differs widely between models, and native support differs from support through third-party apps. Our ranking of multi-coin hardware wallets compares how many networks each model supports.

Can I move crypto between chains with a hardware wallet?

Yes, through an exchange or through a bridge or cross-chain swap that you sign on the device. The device and its app must support both networks, and you need the destination network's gas coin for the first transaction there.

What happens if I send tokens on the wrong network?

If the address belongs to your hardware wallet and the network is EVM-compatible, the funds are usually still yours: add that network in your wallet app. If they went to an exchange deposit address on a network the exchange does not support, contact the exchange; recovery is not guaranteed.

Ready to Choose Your Wallet?

Now that you have the knowledge, take the next step toward securing your crypto.